A. Plug black cart into the wall and make sure the grey network cable is plugged in the back of the computer and in the grey wall plug.
B. Turn on the CPU power (Fig. 2) and log into the system as you would in your office. You may need to change the context when logging in if the last person to use the computer was not a member of your department/division. Click here to find your correct context. If you are not going to use anything else in the system go no further.
Figure 1
A. Make sure switch on the front of the projector that says "-" of "o" is flipped to "-"
B. Take the projector remote and press the ON button to turn the projector on.
C. Press the RGB 1 button to project the computer screen (if screen is not showing already).
Figure 2
A. Make sure the projector is on RGB
B. Put your disc in the CD-ROM/DVD Drive in the computer
C. If the CD doesn't play automatically:
- Double-click Windows Media Player on the desktop
- Click CD Audio on the left
- Click the Play button
D. If the DVD doesn't play automatically:
- From the desktop, double-click on the smart classroom folder
- Double click on Power DVD
- Your DVD should then auto play on it’s own. If it doesn’t, click the play button on the menu panel.
- If you need to adjust the volume, use the remote control for the projector
- If the DVD has a catalog function in it, click on the menu button, which will allow you to pick any section of the movie you would like to view.
A. Close all open windows on the computer desktop
B. Log out of Windows
C. Turn off projector by pressing the Off button on the remote
D. Turn off the computer (Fig. 1)
